Filter
Top Products
26
Chapter 2. Performance
Playing Two Sounds Together
(Dual Play)
Simultaneously playing two tones when one key is pressed is called “Dual play.”
1
Simultaneously press the two Tone buttons that you want to play
together.
The indicator of the button you pressed will light.
When you play the keyboard, the tones of the two Tone buttons you selected will
sound simultaneously.
To cancel Dual play, press any Tone button.
To change the tone of the right button of the two selected tones
Press the [Variation] button.
Dual play now features the tone of the left side’s tone button along with the newly
selected tone.
To change the tone of the left button of the two selected tones
Cancel the Dual play, and then re-select the tone.
■
Adjusting the Volume Balance in Dual Play
(Dual Balance)
You can change the volume balance between the two layered sounds in Dual play.
fig.panel2-2
1
Hold down the [Transpose] button and press the [Split] button.
The indicators of the buttons you pressed will blink.
The current volume balance appears in the display.
2
Press the [-] or [+] button to change the value.
The volume balance changes.
To return to the original volume balance, press the [-] and [+] buttons
simultaneously.
fig.disp-dualbal.e
Press the [Transpose] or [Split] button, and the buttons’ indicator will return to the
previous state.
When Dual play is used, the
[Variation] button’s indicator
will light to indicate the
selection of the right button of
the two selected tones.
When Dual play is used, only
sound number 1 or 2 can be
selected.
If you use Dual play with a
Tone button for which tone
number 3 or 4 is selected, tone
number 1 will be selected for
that Tone button.
12
Volume of the left button tone Volume of the right button tone
This setting returns to the
original value when you turn
off the power.
DP-970_e.book 26 ページ ２００６年３月３１日 金曜日 午後２時２７分