Roland E-09 Musical Instrument User Manual


 
25
Function Menu
Refer to p. 27.
For details on “LCD Contrast” and “Factory Reset,” refer to p. 9.
For details on “Bulk Dump,” refer to p. 28.
Pan DUAL
*
RND, L63–0–R63
(default: 0)
Adjusts the stereo location (the position between the left and right speakers) of the Dual part. If you select
“RND,” the stereo location will change randomly for each note you play. Values beginning with “L” po-
sition the sound toward the left speaker, a value of “0” is the center, and values beginning with “R” po-
sition the sound toward the right speaker.
Rev SPLIT
*
0–127
(default: 100)
Adjusts the amount of reverb applied to the tone of the Split part. With a setting of “0” there will be no
reverb.
Chr SPLIT
*
0–127
(default: 100)
Adjusts the amount of chorus applied to the tone of the Split part. With a setting of “0” there will be no
chorus.
Pan SPLIT
*
RND, L63–0–R63
(default: 0)
Adjusts the stereo location (the position between the left and right speakers) of the Split part. If you select
“RND,” the stereo location will change randomly for each note you play. Values beginning with “L” po-
sition the sound toward the left speaker, a value of “0” is the center, and values beginning with “R” po-
sition the sound toward the right speaker.
KBD SCALE Parameters
Parameter
Value Explanation
Scale C–B
*
-64–63
(default: 0)
As an alternative to the equal tempered scale used in most Western music, you can adjust the pitch of each note
to the scales used by other musical cultures or tuning systems (such as oriental or baroque music).
You can independently adjust the pitch of each note in the octave (C, C#, D, Eb, E, F, F#, G, Ab, A, Bb, B).
For example, if you adjust the pitch of the “C” note, this adjustment will apply to the “C” note of each octave.
In most cases, a quarter tone upward or downward will be appropriate, so you should try settings of “50” or “-
50.”
Scale Mode
*
Main, All
(default:
Main)
Specifies the part(s) to which the above scale setting will apply.
Main:
Only the tone of the Main part
All:
The tones of all parts
MIDI Parameters
UTILITY Parameters
Parameter
Value Explanation
E-09_e.book 25 ページ 2005年11月21日 月曜日 午前11時24分