Filter
Top Products
29
Connecting to MIDI Devices
Turning Transmission and
Reception of Control
Changes On/Off
Messages known as “Control Changes” are used to convey to
another device information about the instances where you
have pressed a pedal, or have turned On/Off the Chorus or
Reverb effects.
Each time the power is turned on, the instrument will always
be set to “On” (it will transmit/receive all Control Change
messages).
If you set it to “Off” the ep-90/70 will no longer send or
receive any Control Change messages.
While holding down the [Piano 1] button,
[Piano 2] button, and [Harpsichord] button,
press the “A5” note to turn the setting On,
or the “B5” note to turn the setting Off.
→ For the notes that correspond to each setting, refer to
“Functions Assigned to the Keyboard” (p. 31).
fig.9-12.e
MEMO
If you want to know more about Control Change Number,
please refer to “MIDI Implementation Chart” (p. 32).
Transmitting Performance
Data from MIDI Out
If this setting is left “On,” performance data recorded on the
ep-90/70 can be transmitted from the MIDI Out connector.
Each time the power is turned on, this setting will always be
at “Off.”
Hold down the [Piano 1] button, the [Piano
2] button, and the [Harpsichord] button,
and press the “D6” note to turn the setting
On, or the “E6” note to turn the setting Off.
→ For the notes that correspond to each setting, refer to
“Functions Assigned to the Keyboard” (p. 31).
fig.9-13.e
The performance data that you recorded will disappear
when the power of the ep-90/70 is turned off.
If you wish to save the performance, use the following
procedure.
1. Connect a MIDI sequencer such as the MT
series (p. 25).
2. Record the performance on the ep-90/70.
3. Set this setting to “On.”
4. Start recording with the connected MIDI
device.
5. Start playback of the recorded song on the
ep-90/70.
6. When playback ends, stop recording.
7. Use a connected MIDI sequencer to save
the data on a floppy disk or other media.
A5
B5
E.PianoPiano 2Piano 1
Vibra-
phone
Harpsi-
chord
While holding down three buttons
Press
On Off
D6
E6
E.PianoPiano 2Piano 1
Vibra-
phone
Harpsi-
chord
While holding down three buttons
Press
On Off