Filter
Top Products
Using the metronome
V-Accordion
r
15
Using the metronome
After setting the metronome parameters to your liking, you
can start using the metronome:
(4) Press the [METRONOME÷INC] H button (it lights) to start
the metronome.
(5) Press it again to switch the metronome back off.
Pitch-related functions
Transpose function
The FR-2/FR-2b contains a Transpose function that allows
you to change the key of the music you are playing. The
advantage of this system is that you can play a song in E
major (for example), while using the fingering of the C major
scale (for example). This may come in handy when you are
used to playing a given song in one key and suddenly need to
play it in a different key. Let’s look at an example:
(1) Press and hold the [SET] E register until it starts flash-
ing.
The Treble keyboard can now be used to select the desired
function.
(2) Press the A1 key or button “3”. See
p. 18 for the location.
The [SET] E register now flashes
rapidly, and the Treble keyboard can
once again be used to play notes.
(3) Use the [DEC] and [INC] H buttons
to set the desired interval.
You can also use registers [1]~[8] F
to set this parameter, in which case
you may have to press the corre-
sponding register twice to obtain the setting marked with
an “*” in the table below. The “*” symbol represents sharp
signs (#) and is indicated by the FR-2/FR-2b by means of a
flashing register. If a Treble register flashes, you therefore
know that you are transposing to a “black” key.
The setting range is –6~0~5 (where “0” means that no
transposition is used). The value refers to the interval. This
can be calculated as follows:
•In what key do you want to play? (This is your “0” value.)
Example→ C major
• What key does the song use?
Example→ E major
• How many semitones do you need to “shift” the notes?
Example→ [C#, D, Eb, E]= 4 up, so register [7].
(4) Press the [SET] register twice to leave the FR-2/FR-2b’s
FUNCTION mode.
Note: This parameter is reset when you switch off the FR-2/FR-2b.
Transposing the Treble keyboard in octave steps
The parameter discussed here allows you to transpose the
Treble accordion or Orchestra section one octave up or down.
(5) Simultanesouly press the [SET] E and [1] (+, one octave
down) or [2] (–, one octave up) register.
Musette Detune
You probably know that an accordion’s 8’ Treble register may
consist of 2 or even 3 reeds that are usually tuned apart to
provide a richer sound (accordionists call it the “musette
effect”). One reed is tuned slightly above, the other slightly
below the correct pitch (and the third, if available, is tuned
“properly”).
Tuning those reeds is a specialist job and usually not per-
formed by accordion players themselves.
On the FR-2/FR-2b, however, “tuning” the “reeds” (that do
not really exist) is a matter of pressing a few buttons.
There are, in fact, more options than can be selected with the
8 registers: Dry, Classic, F-Folk, American L, American H,
Nord Eur, German L, D-Folk L, Italian L, German H, Alpine,
Italian H, D-Folk H, French, Scottish.
Note: This parameter is saved automatically for every register that con-
tains the 8’ footage.
Song function
Your FR-2/FR-2b contains 8 popular accordion songs that
have been prepared for educational purposes. The left- and
right-hand parts are on separate tracks, which allows you to
mute one part (left or right hand) to play it yourself. The
FR-2/FR-2b will play the other part.
Note: The Song function is not available while “Bellows Curve” on p. 20
is set to “Fixed Low”, “Fixed Med” or “Fixed High”.
Selecting a song
The FR-2/FR-2b contains the following educational songs:
(1) Briefly press the [SONG÷DEMO] J button.
(2) Press and hold the [SONG÷DEMO] button.
Transpose
1* –6 F# 5• 0 C
2–5G 5* 1C#
2* -4 G# 6 2 D
3–3A 6* +3 D#
3* –2 A# 7 +4 E
4–1B 8+5F
Transpose
This is what you play…
…and this is how it sounds.
1 Can Can 5 Oh Susanna
2Cielito Lindo 6 Red River Valley
3Ninna nanna 7 Little Brown Jug
4 Carnevale di Venezia 8 Furusato
FR-2+b GB.book Page 15 Tuesday, August 7, 2007 11:19 AM