Filter
Top Products
19
HP-1 – Owner’s Manual
ENGLISH ENGLISH
ENGLISH ENGLISH ENGLISH ENGLISH
You can connect audio devices to play the sound of the HP-1 through the speakers of your audio system, or to record
your performance on a tape recorder or other recording device.
When connecting, please use an audio cable with a standard phone plug (sold separately).
Connection examples
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any con-
nections.
Playing the sound of the HP-1 through the speakers
of an audio system/Recording the performance of the
HP-1 on a recording device
Use the following procedure when turning on the
power:
1.
Turn on the power of the HP-1.
2.
Turn on the power of the connected device.
3.
Adjust the volume of each device.
When recording HP-1 performances with a cassette
deck, etc.
4.
Start recording on the connected device.
5.
Perform on the HP-1.
6.
When the performance ends, stop recording on the
connected equipment.
Playing the sound of an audio device through the
speakers of the HP-1
Use the following procedure when turning on the
power.
1.
Turn on the power of the connected device.
2.
Turn on the power of the HP-1.
3.
Adjust the volume of each device.
Turning off the power
1.
Set the volume of the HP-1 and of the connected
devices to the minimum position.
2.
Turn off the power to the HP-1.
3.
Turn off the connected equipment.
Connecting to a computer
You can use a USB→MIDI interface cable (sold sepa-
rately) to connect the HP-1 to your computer.
If the HP-1 is connected to a computer running
sequencer software such as Roland’s “Visual MT”, you
can record your music.
Connection examples
• To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any con-
nections.
• In order to make connections to your computer, you
must install MIDI driver software on your computer.
For details, refer to the owner’s manual for your MIDI
interface.
Use a USB MIDI interface cable to connect the USB
port of your computer to the MIDI connectors of the
HP-1.
6. Connecting audio equipment
Input R/L
(Line In, Aux In)
HP-1
Output R/L
(Line Out, Aux Out)
HP-1
MIDI IN
MIDI OUT
USB Connector
of your Computer
USB on your
computer
Computer
UM-1, etc.
HP-1
HP-1_GB Page 19 Friday, March 29, 2002 12:37 AM