Filter
Top Products
Main operations
8
3.4 Connecting optional
headphones
The HP-1 features two headphone sockets. This allows
two persons to listen through headphones simulta-
neously, making it very useful for lessons and when
performing piano pieces for four hands. Additionally,
this allows you to play without having to worry about
bothering others around you, even at night.
1.
Turn the volume all the way down.
2.
Connect the headphones to either headphone
socket.
3.
Adjust the volume.
By connecting headphones to the HP-1, you switch off
its speakers, which is ideal for playing or practising
without disturbing others.
Note: Be sure to use stereo headphones (Roland RH-25/50,
for example).
3.5 Turning the power on and off
Your HP-1 is fitted with an amplifier and speakers, so
that you do not need additional devices.
1.
Turn the volume all the way down.
2.
Press the [Power] switch, to turn on the power.
The power switch is located to the left of the keyboard.
Note: Your HP-1 is equipped with a protection circuit. A
brief interval after power-up is required before it will oper-
ate normally.
Turning off the power
1.
Turn the volume all the way down.
2.
Press the [Power] switch to turn off the power.
3.6 Adjusting the volume
Use the [Volume] knob to adjust the volume.
The knob’s setting also determines the volume in
headphones you may have connected.
Phones plug x 2
P
h
o
n
e
s
Phones socket x2
HP-1_GB Page 8 Friday, March 29, 2002 12:37 AM