Filter
Top Products
18
Before You Play
You can use headphones to enjoy the LX-10F without disturbing those around you, such as at night.
Connecting the Headphones
The LX-10F has two headphone jacks, two people can also
use headphones simultaneously.
1.
Plug the headphones into the Phones jack.
If headphones are connected, no sound will be output
from the LX-10F’s speakers.
2.
Use the LX-10F’s [Volume] slider to adjust the
headphone volume (P.17).
If headphones are connected, a headphone symbol is shown
in the lower left of the screen.
Using the Headphone Hook
Whenever you are not using the headphones, you can hang
them on the headphone hook of the LX-10F.
Attaching the Headphone Hook
1.
Press and twist the headphone hook included with
the LX-10F into the hole in the bottom left of the
LX-10F (refer to the figure above).
2.
Turn the headphone hook wing nut to secure the
headphone hook.
Do not hang anything other than headphones on the
headphone hook. Doing so may damage the
instrument or the hook.
Cautions when Using Headphones
• To prevent damage to the cord’s internal conductors, avoid
rough handling. When using headphones, mainly try to
handle either the plug or the headset.
• Your headphones may be damaged if the volume of a device
is already turned up when you plug them in. Minimize the
volume before you plug in the headphones.
• Excessive input will not only damage your hearing, but may
also strain the headphones. Please enjoy music at an
appropriate volume.
• Use headphones that have a stereo 1/4” phone plug.
Using the Headphones
Headphone hook
Headphone hook
Wing nut
LX-10F_e.book 18 ページ ２０１０年１月１４日 木曜日 午後１０時４５分