Filter
Top Products
49
Recording Your Performance
Recording and stopping
fig.Panel
1.
Press the [
] button.
You’ll hear a two-measure count, and then recording will begin.
Alternatively, you can start recording by playing the keyboard instead of pressing the [ ] button. In this case,
there will be no count-in.
When recording begins, the [ ] button and [ ] button will light.
During the count, “-2” then “-1” will be shown as the measure number in the lower right of the
screen.
2.
To stop recording, press the [
] button.
Additional recording
fig.Panel
1.
Press the [
] button.
You’ll return to the beginning of the recorded performance.
2.
Press the [
] button.
If you want to erase the previously recorded performance and re-record a new
performance, press the [
] button.
3.
If you want to record onto a different track, press the [
] button.
4.
Press the button of the track that you want to record, so it’s blinking.
The [
] button will light, the [ ] button will blink, and the LX-10F will enter recording-standby mode.
If you decide not to record, press the [
] button once again.
If you select a previously recorded track for recording, your new performance will be overwritten onto that
track, erasing the previously recorded performance.
5
6
1
4
2
3
LX-10F_e.book 49 ページ ２０１０年１月１４日 木曜日 午後１０時４５分