Filter
Top Products
33
Chapter 5. Changing Various Settings
For details on each function, refer to the explanations
below.
3.
Press the [-] or [+] button to change the value.
If you press the [-] and [+] buttons simultaneously, the
value will return to the power-up default setting.
The procedure differs from that for Song Backup.
For more details, refer to p. 31.
How to exit function mode
4.
Press the [SPLIT] or [TWIN PIANO] button.
The button’s indicator will return to the previous state.
■
Tuning to Other Instruments’
Pitches (Master Tuning)
In situations such as when playing ensemble with other
instruments, you can tune the MP-70’s standard pitch to the
pitch of another instrument. The standard pitch generally
refers to the pitch of the note that’s played when you finger
the middle A key.
1.
Hold down the [SPLIT] button, and press the [TWIN
PIANO] button.
The MP-70 switches to the function mode.
2.
Press the [PIANO] button.
fig.disp-tune
The last three digits are indicated in the display. “440.0 Hz”
is indicated in the figure above.
Value
415.3 Hz–440.0 Hz–466.2 Hz
Power-up default setting
440.0 Hz
This setting remains in effect until you turn off the power.
→
If you want to have the settings remain stored even while the
power is turned off, refer to “Getting the Master Tune Setting
To Be Remembered While the Power Is Turned Off” (p. 36).
[SONG/TEMPO]
Song Backup
Deleting Backed Up Songs
p. 31
[METRONOME/
COUNT IN]
Saving the master tune setting
p. 36
[PLAY]
Transmitting a recorded
performance
p. 39
[RIGHT]
V-LINK
p. 36
Button
Function Page
MP-70_e.book 33 ページ ２００６年３月２９日 水曜日 午後４時１７分