Filter
Top Products
8
Connections
Attaching the Expression Pedal
The PK-25A is shipped with the expression pedal detached. Before connecting the PK-
25A to another device, please attach the expression pedal.
When attaching or detaching the expression pedal, be careful not to step on a knob bolt. When removing
the knob bolts, place them out of the reach of children. If a knob bolt is accidentally swallowed, consult a
doctor immediately.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
The connector in the upper part of the PK-25A is only for connecting the supplied expression pedal.
Connecting this to any device other than the PK-25A’s own expression pedal could result in malfunction.
NOTE
1. Connect the expression pedal cable
to the connector in the upper part of
the PK-25A.
3. Use the three supplied knob bolts to
fasten the expression pedal, making
sure that the bolt holes are aligned.
2
. While being careful not to pinch the
cable, place the expression pedal on
the PK-25A.
Supplied Knob Bolts
(three point)
View from Rear
Knob bolt
NOTE
PK-25A_e 8ページ ２００５年１１月１７日 木曜日 午前１０時２０分