Filter
Top Products
10
You can select the part that will be sustained when you press the Hold pedal.
→
HOLD PEDAL ASSIGN (VK-88 Owner’s Manual, p. 80)
A variety of functions can be assigned to each foot switch (L/R).
→
PK FOOT L ASSIGN (VK-88 Owner’s Manual, p. 68)
→
PK FOOT R ASSIGN (VK-88 Owner’s Manual, p. 68)
Connecting to the VK-8
Use a MIDI cable to connect the VK-8 and PK-7A.
1.
Make sure that the power of the VK-8 and PK-7A is turned off.
2.
Use a MIDI cable to connect the VK-8’s MIDI PEDAL IN connector to the
PK-7A’s MIDI OUT connector.
3.
Connect the appropriate end of the AC adaptor to the DC IN jack. Then
connect the other end to a standard AC outlet.
Once the connections have been completed, turn on power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other
devices.
4.
Turn on the power of the PK-7A, and make sure that the indicator on
the PK-7A’s rear panel is lit.
5.
As described in the VK-8 Owner’s Manual, turn on the power of the VK-
8.
6.
Make sure that the Sub-Keyboard Function is on (VK-8 Owner’s
Manual p. 58).
MEMO
MEMO
MIDI OUT Connector
MIDI PEDAL IN Connector
MIDI Cable
NOTE
PK-7A_e 10 ページ ２００５年１１月１７日 木曜日 午前９時５２分