Filter
Top Products
8
Connections
Attaching the Expression Pedal
The PK-7A is shipped with the expression pedal detached. Before connecting the PK-7A
to another device, please attach the expression pedal.
When attaching or detaching the expression pedal, be careful not to step on a knob bolt. When removing
the knob bolts, place them out of the reach of children. If a knob bolt is accidentally swallowed, consult a
doctor immediately.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
The connector in the upper part of the PK-7A is only for connecting the supplied expression pedal.
Connecting this to any device other than the PK-7A’s own expression pedal could result in malfunction.
NOTE
1.Loosen the knob bolt on the rear panel
of the PK-7A.
3.While being careful not to pinch the
cable, place the expression pedal on
the PK-7A.
2
.Connect the expression pedal cable to
the connector in the upper part of the
PK-7A.
4.
Use the two supplied knob bolts to
fasten the expression pedal, making
sure that the bolt holes are aligned.
Retighten the knob bolt of the rear panel.
Knob bolt of the
rear panel
Supplied Knob bolts (two places)
Knob bolt of the
rear panel
NOTE
PK-7A_e 8 ページ ２００５年１１月１７日 木曜日 午前９時５２分