Filter
Top Products
30
Selecting the Pad Type
4
Strike the pad you wish to set.
The setting screen for the struck pad appears.
5
Select the most suitable trigger type from the following chart for the
pad you are using.
6
Press [+] or [-] to select the trigger type.
7
Repeat Steps
4
–
6
to set the trigger type for each pad.
8
Press [KIT].
[KIT] lights, and the Drum Kit screen appears.
fig.P-017ai
9
Strike the pads and press the pedals to check the following.
• Are sounds being played with all pads and pedals?
• Is the right instrument for each pad being played?
If the correct sound is not being played, check the pad settings once more and
refer to “Troubleshooting” (p. 110).
Pad
Trigger Type Pad Trigger Type Pad Trigger Type
PD-8
PD-8 PD-105 PD-125 CY-6 CY Type
PD-6 PD Type PD-125 CY-12H
PD-7 KD-8 KD-8 CY-12R/C
PD-9 KD-7 KD Type CY-14C
RP-2 PD-80R KD-80 CY-15R
PD-80 KD-85 RT-7K RT-7K
PD-80R KD-120 RT-5S RT-5S
PD-85 CY-8 CY-8 RT-3T RT-3T
PD-100 RIM Edge RIM
PD-120 PD-120
You can also make the
selection by pressing
[SHIFT] + [ ] or
[SHIFT] + [ ] (Trigger
Select).
These settings apply to
b
oth the head and the rim.
TD-6KV_e.book 30 ページ ２００５年１月２４日 月曜日 午後７時４分