Filter
Top Products
24
Installing the ARX Expansion Board
To remove an expansion board, reverse the process by which you inserted it.
1.
Unlatch the latched board holders.
fig.attach08.eps
2.
Verify that the two latched board holders are unlocked, then gently pull up the board and
disconnect the connector.
fig.attach09.eps
3.
Disengage the board from the non-latched board holders, and remove the board.
4.
Attach the cover by reversing step 2 of the installation process.
Removing an Expansion Board
VS-700R_e1.book 24 ページ ２０１０年６月１５日 火曜日 午後４時５９分