Filter
Top Products
11
Indications and displays
Transmitter battery status display
The 6-step transmitter battery status display º provides information on
the transmitter’s remaining battery/accupack capacity:
Note:
If no battery/accupack status signal is received, the battery status
display is not shown.
When the battery/accupack is almost empty, text “Low Batt” flashes in
alternation with the status display. In addition, the warning triangle for
indicating error states
5 lights up red.
Command display (status display of the audio outputs AF and COM)
The command display is only available with the EM 3732 Command twin
receiver.
Besides the two audio outputs
K and M, the EM 3732 Command twin
receiver also features two command outputs
J and L.
Via the “Command” menu, you can configure the receiver so that – with
the command button of the transmitter pressed – the audio signal is
available at only one of the outputs or at both (see “Configuring the audio
outputs of the EM 3732 Command twin receiver” on page 32).
The command display ¾ shows the audio output at which the trans-
mitter’s audio signal is available.
When “AF” lights up brightly, the audio signal is available at the audio
output
K or M.
If the “AF” symbol does not appear, the audio signal is not issued on the
audio output
K or M.
When “COM” lights up brightly, the audio signal is available at the
command output
J or L.
If the “COM” symbol does not appear, the audio signal is not issued on the
command output
J or L.
Number of segments
Capacity
Accupack Battery
approx. 100 % full
approx. 80 % -
approx. 60 % half-full
approx. 40 % -
approx. 20 % -
(Low Batt)
approx. 0 % almost empty
Low Batt
COM
AF
AF
COM