Filter
Top Products
37
The operating menu
To automatically obtain an IP address (dynamic IP addressing):
̈ Change to the setting mode of the “IP-Addr” menu.
The first byte starts flashing.
̈ Press the jog dial
7 several times until the arrow points to “Auto”.
̈ Press the save button
8.
̈ Switch the receiver off and on again (see “Switching the receiver on/
off” on page 19).
The new IP address becomes effective.
Displaying the network address (MAC address)
MAC Via the “MAC” menu, you can display the Media Access Control (MAC)
address of the Ethernet interface. The MAC address is fixedly stored in
each receiver and cannot be changed.
̈ Change to the setting mode of the “MAC” menu.
The 12-digit MAC address is displayed.
Setting a receiver to standby mode
Standby You can set a receiver to standby mode and mute it. To do so, proceed as
follows:
̈ Change to the setting mode of the “Standby” menu.
The icon and the green backlighting of the save button
8 flash.
̈ Press the save button
8.
The esc button
6 is backlit in red. The receiver is set to standby mode
and the display is switched off.
Note:
The standby mode remains active even when you switch the receiver
off and on again.
To end the standby mode:
̈ Press the jog dial
7 or the esc button 6.
The display is switched on.
Loading the factory-preset default settings
Reset Via the “Reset” menu, you can reset the current settings to the factory-
preset default settings.
̈ Change to the setting mode of the “Reset” menu.
The question “Reset to factory defaults?” appears. The green
backlighting of the save button
8 flashes.
̈ Press the save button
8 until the progress bar is complete.
All settings except for the booster supply voltage, the sampling rate at
the digital output and the network address are reset to the factory-
preset default settings. The display changes to the selection mode of
the operating menu.
00:1B:66:00:00:01
00 1B
66 00
00 01
OFF
esc
save
sync
digital audio
processing
sync
DEV
M
H
z
790.800
03.03
BANK
CH
COM
AF
000
Reset to
factory defaults ?
esc
save
sync
digital audio
processing
sync
DEV
M
H
z
790.800
03.03
BANK
CH
COM
AF