Filter
Top Products
68
Inserting and changing the battery
Ǡ Unscrew the display section ´ by turning it counter-clockwise.
Ǡ Slide back the display section ´ until the battery compartment ¿
becomes fully accessible.
Ǡ Insert the 9 V PP3 battery (IEC 6 LR 61). Please observe correct polarity
when inserting the battery.
Ǡ Push the the battery compartment into the radiomicrophone’s body.
Ǡ Screw the display section tight.
Ǡ To change the battery, press out the battery from below (press in the
direction of the arrow).
Switching the transmitter on/off
Ǡ Turn the protective cap ² at the bottom of the radiomicrophone so
that the ON/OFF button becomes accessible.
Ǡ Press the ON/OFF button ¸ to switch the transmitter on. The red
LED lights up.
Ǡ To switch the transmitter off, press the ON/OFF button until “OFF”
appears on the display. You can then release the button. The red LED
goes off.
Muting the transmitter
Use the MUTE switch to noiselessly mute the transmitter’s audio signal (this
switch does not switch off the transmitter).