Filter
Top Products
12
Using the radio microphone
Using the radio microphone
To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of the receiver).
2. Switch the radio microphone on (see next section).
The transmission link is established and the display backlighting of the
receiver changes from red to orange.
If you cannot establish a transmission link between transmitter and
receiver, read the chapter “Synchronizing the radio microphone with a
receiver” on page 27.
Switching the radio microphone on/off
To switch the radio microphone on (online operation):
To switch the radio microphone on and to deactivate the RF signal on
switch-on (offline operation):
It is vital to observe the notes on frequency selection on page 27.
̈ Briefly press the ON/OFF button ¹.
The red ON LED ¾ lights up. The “Frequency/Name” standard
display appears on the display panel. The transmission
icon ብ is displayed. The radio microphone transmits an RF
signal.
̈ Keep the ON/OFF button ¹ pressed until “RF Mute On?”
appears on the display panel.
¹
¾
ON/OFF
ON/OFF