Filter
Top Products
21
Adjusting settings via the operating menu
Adjusting settings via the
operating menu
The main menu “Menu”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to −48 dB, adjustable in steps of 6 dB
Make use of the possibility to adjust settings
via the operating menu of your receiver and to
transfer these settings to the radio micro-
phone.
For more information, refer to the instruction
manual of the receiver. The relevant informa-
tion is marked with the sync icon.
The audio level display “AF” ቢ always indicates the
audio level, even if the radio microphone is muted,
e.g. allowing you to check the adjusted sensitivity
before live operation.
Input sensitivity is
adjusted...
Effect/display
... too high Close talking distances, speakers
with loud voices or loud music
passages cause overmodulation in
the transmission link.
The audio level display “AF” ቢ
shows full deflection for the duration
of the overmodulation.
... correctly The audio level display “AF” ቢ
shows full deflection only during
the loudest passages.
... too low The transmission link is undermodu-
lated. This results in a signal with
high background noise.
Menu
–12 dB
Sensitivity
–12 dB
Sensitivity
–36 dB
Sensitivity
“Stored”
Call up
“Sensitivity”
Select the desired
setting
Store the setting
MHz
531.375
B.Ch: 20.24
MUTE
P
AF
ቢ