Filter
Top Products
8
Putting the radio microphone into operation
Putting the radio microphone
into operation
Inserting the batteries/accupack
For powering the radio microphone, you can either use two
1.5 V AA size batteries or the rechargeable Sennheiser
BA 2015 accupack (see “Accessories and spare parts” on
page 31).
̈ Unscrew the lower part of the radio microphone from
the radio microphone’s body ¿ by turning it counter-
clockwise.
̈ Slide back the lower part of the radio microphone as far
as it will go.
̈ Open the battery compartment cover ƹ.
CAUTION! Danger of damage to the radio microphone!
When unscrewing the radio microphone
during operation while pressing the MIC
button » at the same time, the electronics of
the radio microphone will be damaged.
̈ Do not press the MIC button » while
unscrewing the radio microphone.
When unscrewing the radio microphone during
operation, the muting function is automatically
activated. “MUTE” appears on the display panel.
When screwing the lower part of the radio micro-
phone back to the radio microphone’s body, the
muting is canceled. “MUTE” disappears from the
display panel.
¿
ƹ