Filter
Top Products
4
The SKM 300 G3 radio microphone family
The factory-preset frequencies within one frequency bank
are intermodulation-free. These frequencies cannot be
changed.
For an overview of the frequency presets, please refer to the
supplied frequency information sheet. Updated versions of
the frequency information sheet can be downloaded from
the SKM 300 G3 product page on our website at
www.sennheiser.com.
The frequency banks “U1” to “U6” allow you to freely select
and store frequencies. It might be that these frequencies
are not intermodulation-free.
Areas of application
The radio microphone can be combined with the EM 300 G3
rack-mount receiver.
The EM 300 G3 rack-mount receiver is available in the same
UHF frequency ranges and is equipped with the same
frequency bank system with factory-preset frequencies.
This has the advantage that:
• a transmission system is ready for immediate use after
switch-on,
• several transmission systems can be operated simulta-
neously on the preset frequencies without causing
intermodulation interference.
Overview of the microphone heads:
The name and pick-up pattern of the microphone head are
printed on the sound inlet basket of the radio microphone.
Radio microphone
Interchange-
able microphone
heads
Receiver
SKM 300-835 G3*
* The name of the radio microphone is a combination of the
name of the transmitter and the name of the microphone
head:
Transmitter + microphone head = Name of radio micro-
phone
SKM 300 + MMD 835-1 = SKM 300-835
MMD 835-1, EM 300 G3
SKM 300-845 G3
*
MMD 845-1
SKM 300-865 G3
*
MME 865-1
Microphone
head
Microphone
type
Pick-up pattern
MMD 835-1 dynamic
– cardioid
MMD 845-1 dynamic
– super-cardioid
MME 865-1 condenser
– super-cardioid
531.375
SKM300
ew300 G3
B.Ch: 20.24
PEAK
MUTE
EQ
+ 12dB
-10
0
40
30
20
10
-20
-30
-40
AF
RF
MHz
P