Filter
Top Products
ᕢ
ᕤ
ᕡ
ᕣ
39
38
19 Suitable Sennheiser receivers
Your SKM 3072-U hand-held transmitter optimally matches any of the
Sennheiser 3000 series receivers.
ᕡ EM 3031 Cat. no. 04000
ᕢ EM 3032 Cat. no. 04200
EM 3532 Cat. no. 04400 (not pictured)
The SKM 3072-U can also be used with any receiver of the 1000 and
5000 series, receivers of the 1000 series, however, cannot receive the battery
status information.
The frequencies of your SKM 3072-U are pre-programmed by the factory.
In case you want to change these frequencies, please contact your
Sennheiser distributor who has the required specialist equipment.
20 Recommended accessories
ᕣ ME 3005 microphone head, for presentations Cat. no. 04573
ᕤ MZW 4032 A windshield, anthracite Cat. no. 02978
ᕤ MZW 4032 windshield with
colour-coded identification rings, various colours
18 Locking the POWER button /
“Lock mode” function
You can lock the POWER button of your SKM 3072-U to prevent accitental
switching off by a user inexperienced in handling the transmitter.
Locking the POWER button
̈ Press the SET button to get into the setting mode.
̈ If you press SET three times, “Loc” begins to flash on the display.
̈ Press the SET button for more than a second to store your setting.
“Sto” briefly appears on the display, indicating that the new setting
has been stored. The display then switches back to the standard
display.
The POWER button is now locked. If POWER is accidentally
pressed, the display briefly indicates “Loc” and then switches back
to the standard display. With the ̃/̅ buttons, however, you can
still choose the content of the display i.e. whether the transmission
frequency or the channel number is displayed.
Unlocking the POWER button
̈ When briefly pressing SET, “Loc” begins to flash on the display.
̈ Now press the SET button for more than a second.
The display switches back to the standard display and the buttons
can now be operated as usual.