Filter
Top Products
6
TABLE-TOP MOUNTING
Adhere the four (4) supplied rubber feet to the bottom of the
mixer at each corner, as shown in Figure 9. This will keep it
from sliding and protect the table surface.
ATTACHING RUBBER FEET FOR TABLE–TOP MOUNTING
FIGURE 9
FIXED MOUNTING
Top Mount
1.Fasten the straddle brackets to the recessed edges of the
chassis, using four (4) bracket screws, as shown in Figure 10.
INSTALLING STRADDLE BRACKETS FOR TOP MOUNTING
FIGURE 10
2.Fasten the straddle brackets to the top of the mounting sur-
face, using the four (4) supplied wood screws. See Figure 11.
SECURING MIXER TO TOP MOUNTING SURFACE
FIGURE 11
Hanging Mount
1.Fasten the straddle brackets to the top of the mixer, as
shown in Figure 12.
INSTALLING STRADDLE BRACKETS FOR
HANG MOUNTING
FIGURE 12
2. Fasten the straddle brackets to the bottom of the mounting sur-
face, using the four (4) supplied wood screws. See Figure 13.
SECURING MIXER TO BOTTOM MOUNTING SURFACE
FIGURE 13