Filter
Top Products
39
Parts Identification
A AF (audio frequency) indication
Appears whenever the input audio signal is
stronger than the reference level.
B RF (radio frequency) indication
Appears during signal transmission from
the antenna.
C BATT (battery) indication
Shows the battery condition.
For details, see “Battery indication” on page 43.
D CH (channel) indication
Shows the transmission channel. Each time
you press the SET button in transmission
mode, the channel indication changes as
follows.
For details, see “Transmitter Settings” on page 54.
e + (+ selection) / – (– selection/reset)
buttons
Press these buttons to set the transmission
channel, frequency, or attenuation level of
the input signal.
The “–” button resets the accumulated use
time to “00:00”.
f SET button
Press to change and enter display
parameters.
For details, see “Transmitter Settings” on page 54.
g POWER switch
Turns the power of the microphone ON or
OFF.
h Battery compartment
Accommodates two LR6 (size AA) alkaline
batteries.
For details on how to insert the batteries, see
“Power Supply” on page 42.
Portable diversity tuner
(URX-P2)
a Antennas
b MONITOR connector (3.5-mm
diameter stereo mini jack)
To monitor the tuner output, connect the
headphones to this connector.
Transmission
channel
Transmission
frequency
Accumulated
use time
Attenuation
level of the
input signal
The channel/frequency indications for
U30 model are shown.
Press
the
SET
button.