Filter
Top Products
47
Attachment and Installation Procedures
Attaching the supplied
accessories to the portable
diversity tuner (URX-P2)
To connect the supplied
conversion cable to the
OUTPUT connector
To attach the belt clip
See “To attach the belt clip” on page 45.
To attach the shoe mount
adapter
Before attaching the shoe mount adapter,
attach the belt clip (see page 45).
Example: XLR-BMP conversion output
cable for the URX-P2 (supplied)
For a secure connection, be sure to turn
and lock the connector cover.
While pushing the bottom of the belt
clip to make some space between the
belt clip and the tuner (1), align the
vertical parts of the belt clip with the
two vertical grooves on the shoe
mount adapter. Then, push the shoe
mount adapter in the direction of the
arrow (2). Push it fully until the
horizontal groove on the shoe mount
adapter holds the horizontal part of
the belt clip in place.