Filter
Top Products
Administrator Settings
115
Wide screen VGA or TV monitor In Wide (native) mode.
VGA Out Mode
VGA Out Mode makes it possible to specify which signal to send to the VGA/DVI output.
Main
Should be used if you want to use a VGA monitor as your main monitor.
Dual
Should be used if you want to use a VGA monitor as your dual monitor.
VGA Out Quality
The supported range of VGA formats will be optimized for the VGA display monitor based on the
source image.
VGA Out Quality enables the user to change the preferred format for the DVI/VGA output. It is
recommended to keep this setting in Auto unless your screen doesn’t support some of the XGA
or SVGA formats the system is using. Note that the VGA Out port support VESA Power
Management.
Auto
VGA output format will be optimized dependant of the video source format,
refresh and of the EDID information available.
Supported formats are:
SVGA (800x600) 75Hz
XGA (1024x768) 60Hz
WXGA (1280x768) 60Hz
SVGA 800x600
75Hz
VGA output format is forced to SVGA format (800x600) 75Hz
XGA 1024x768
60Hz
VGA output format is forced to XGA format (1024x768) 60Hz
PC Picture Format (wide screen monitors only)
PC Picture Format setting only takes effect when TV or VGA Monitor Format is set to Wide. Use
this setting to determine if you want your PC presentations to be shown stretched in full screen,
or with correct aspect ratio using part of the widescreen display. With the VGA Out Quality set to
Auto the presentation will be of the best possible quality supported by the monitor.