Filter
Top Products
8
SETUP EXAMPLE: DUAL INPUTS
In this setup, we utilize the NOVA Dynamics’
auto-sensing inputs to connect two guitars at
the same time. This allows for individual level
calibration of the inputs, which is a great
advantage if e.g. you want to use two guitars
which have very different output levels due to
different pick-up configurations. This might be
the case if there are passive single coils on
one guitar and active humbuckers on the
other. Furthermore, you save an A/B switch
in your setup.
• Connect two guitars to the inputs A and B
of the NOVA Dynamics.
• Connect output A of the NOVA Dynamics
to the input of your amp.
• Be sure to turn down the volume
potentiometer on the guitar not currently
in use.
Note: For best signal to noise ratio, calibrate
your guitars individually. For further
information, refer to this manual’s
“Calibration” section.