Filter
Top Products
This is for use of an external sound module or MIDI sequencer.
1.
Transmit MIDI data
Use a MIDI cable to connect the MIDI OUT jack on the drum module
with the MIDI IN jack on the external MIDI device.
2. This drum is designed to output all the MIDI codes generated by
pads striking or pedal stepping via MIDI output connector. Please
note, clicking and the MIDI codes in songs are excluded.
1. The audio output of a CD player or another audio source must be
connected to AUX IN jack on the rear panel which can be mixed
with the sound of the drum. This is a function that allows you to
play along with your favorite song.
2. The volume of the external signal is adjusted with the VOLUME
knob.
1. When connecting an amplifier please follow steps listed bellow:
a.
2. The volume is adjusted with the VOLUME knob.
Connect the amplifier to the Output L/MONO and R jacks on the
rear panel.
b. For monaural playback, use the L/MONO jack.
c. For stereo playback, connect both L/MONO and R jacks.
An optional set of stereo headphones can be connected to the
PHONES jack located on the side of the drum module.
* Adjust the volume to a comfortable level.
Make sure the power is switched OFF and connect the power adapter
totheDCINjackontherearpanel.
Note:
1. To protect the speakers, amplifier and the drum module from
damage, rotate the volume knob to the minimum volume level
before powering ON.
2. Make sure the power is switched OFF when connecting the drum
module to an external device.
E07
Connect a MIDI device
Connecting audio equipment
Connect a CD player, etc (Aux. In jack)
Connect Headphones
Connect the power supply
English
kick
output
R L /mono a u x .in
ON OFF
dc 9v.
kick
output
R L /mono a ux .in
ON OFF
dc 9v.
Amplifer Amplifer
midi out
hi-hat
control
hi-hat ridecrash
MIDI OUT
MIDI Device
MIDI IN
MIDI Data
kick
output
R L /mono a u x .in
ON OFF
dc 9v.