Filter
Top Products
Using Stratagy ES with a Strata CIX/CTX
CTX Proprietary Integration
Stratagy ES User Guide 04/05 91
³ To record a call
1. With a call in progress, press
5HFRUG.
If you are using the auto method, the Record LED flashes rapidly and there is
approximately a one second interval (in extreme busy conditions, up to five
seconds) before the recording starts and the Record LED changes to the in-use
interval flash rate. You are now recording. Continue to Step 3.
...or if you are using the manual method, the Record LED flashes green rapidly.
Continue to Step 2.
2. (Manual method only) If you want to record the call to the predefined mailbox
associated with the phone you are using, press
. The Record LED flashes rapidly
and there is approximately a one second interval (in extreme busy conditions, up to
five seconds) before the recording starts and the Record LED changes to the in-use
interval flash rate. You are now recording.
...or if you want to record this call to another mailbox, enter the mailbox number
(usually the extension number). Finish by pressing
.The Record LED flashes
rapidly and there is approximately a one second interval (in extreme busy
conditions, up to five seconds) before the recording starts and the Record LED
changes to the in-use interval flash rate. You are now recording.
3. To stop recording, press
5HFRUG. The LED turns off and the recording stops. To
resume recording at this point, you need to begin a new recording, see Step 1 on
previous page.
Pause/Resume Recording
You can pause the recording while continuing the conversation by pressing 365(6.
The PS/RES LED flashes red. Your conversation is no longer being recorded.
To resume recording as part of the same message, press the
365(6 button again. You
can pause and resume indefinitely throughout the conversation. The only limit may be
a message length imposed by the voice mail system.