Filter
Top Products
8
Audio Connections
Music and Microphone Vocals through the Karaoke Mixed Outputs
The two Karaoke Mixed Output channels allow you to
connect vocals and music to up to two separate audio
input devices (mixer, amp, power speaker, recording
device, etc.).
What you will need:
• 2 RCA L/R (red & white) audio cables
• Up to 2 audio input devices (mixer, amp, power
speaker, recording device, etc.)
1. Connect one end of the L/R RCA audio cable to one
of the L and R (red & white) RCA Karaoke Mixed
Output channels on the DVG-777K II’s rear panel
2. Connect the other end of the L/R RCA audio cable to
the L/R RCA audio inputs on an audio input device
3. To connect to a second device, follow steps 1 and
2 above, except now using the other Karaoke Mixed
Output channel on the DVG-777K II’s rear panel
5.1 Audio (Disc audio only, no microphone vocals)
NOTE: Microphone vocals are not present in the 5.1 Channel signal.
Connecting to a 5.1 Surround Sound Receiver (Music only, no microphone vocals)
What you will need:
• 6 RCA-style surround sound cables
• A 5.1 surround sound receiver or amplifier
1. Connect an end of each RCA cable to the FL, FR, CEN, SL,
SR, and SW outputs on the rear panel of the DVG-777K II
2. Connect the other end of each RCA cable to the FL, FR,
CEN, SL, SR, and SW inputs on a 5.1 CH. Surround Sound
receiver or amplifier.
NOTE: The actual inputs may be labeled differently on certain
receivers and amplifiers.
• FL - Front Left
• FR - Front Right
• CEN - Center
• SL - Side Left
• SR - Side Right
• SW - Subwoofer
Getting Connected
REC OUT
remote
AV OUT
AV INPUT STEREO INPUT
PHONO
RECORD AUDIO AV3 AV2 AV1 PHONO 3 CD 3 CD 2 CD 1
PHONO 2
LINE
PHONO 1
LINE