Filter
Top Products
13
Front
and
rear
panel
descriptions
and
functions
1.
ANTE
N
ANTENANTE
NAS
NNASN
- P
NAS - PNAS
rovide both RF and AF sig
nals.
2. POWER (LED)
- Indicates whether the UHF-5805 is ON or OFF. When it is lit, the power is ON.
2. POWER (LED)
2. POWER (LED)
3. RF (LED)
- Lights when RF signals are received from the microphone channels.
3. RF (LED) - Lights when RF signals are received from the microphone channels.3. RF (LED)
4. AF (LED)
-
4. AF (LED) - 4. AF (LED)
Lights when AF signals are received from the microphone channels.
5.
SQUELCH
controls
SQUELCH
SQUELCH
- Manual controls for controlling each microphone’s signal strength for best
controls
controls
performance. Turn clockwise to increase SQUELCH control and turn counter-clockwise to decrease
SQUELCH application.
6. VOLUME controls
- Adjusts the individual VOLUME of the receiver’s 4 microphone channels.
6. VOLUME controls
6. VOLUME controls
7. MICROPHONE modules
- Contains the SQUELCH and VOLUME controls for each of the 4 wireless
7. MICROPHONE modules - Contains the SQUELCH and VOLUME controls for each of the 4 wireless 7. MICROPHONE modules
microphones. Each module can be easily removed individually.
8. POWER button
- Turns the UHF-5805 ON/OFF.
8. POWER button
8. POWER button
9. AC POWER connection
- Main power jack for connection to an AC electrical outlet or power strip/surge
9. AC POWER connection - Main power jack for connection to an AC electrical outlet or power strip/surge 9. AC POWER connection
protector. NOTE: Make sure you are connecting the 14V power adapter here.
10. MIXED OUTPUT
- This ¼” unbalanced output jack is for output connection to amplifiers, effects devices
10. MIXED OUTPUT
10. MIXED OUTPUT
or mixers. Both mic channels are output through this jack for mixed output.
11. XLR AUDIO OUTS
- These XLR unbalanced output jacks are for output connections to amplifiers, effects
11. XLR AUDIO OUTS
11. XLR AUDIO OUTS
devices or mixers. These are for separate mic channel connections with unmixed mic output.
1
5
6
7
9 10
11
3 42
8