Filter
Top Products
10
Front Panel
1. Antenna Connector -
Connect the antennas to these connectors to receive the wireless signals from the microphones.
2. Module Volume/On-Off Knob -
This dual purpose knob controls the volume of this module. Turning the knob clockwise
will increase the volume, turning counter-clockwise will decrease it. Turning the knob counter-clockwise until it clicks will
switch the power off on this module. Turn it clockwise to switch the module on.
3. Module Display Window -
This LCD screen displays information about this module. See the Module Display Window
descriptions and functions for more details.
4. Up/Set Button -
While in menu mode, press this button to change or set the selected menu item. While not in menu
mode, press and hold this button to increase the squelch.
5. Menu Button -
Press this button to toggle through the different menu modes.
6. Down Button -
While in menu mode, press this button to change the selected menu item. While not in menu mode,
press and hold this button to decrease the squelch.
7. IR (infrared) Transmitter -
This transmitter is used to communicate with the microphone while setting the frequency.
While in IR mode, it will transmit an IR (infrared) signal which tells the microphone which frequency to use.
NOTE: The IR transmitter is used only during microphone frequency setup. It does not transmit or receive audio signal.
Descriptions and Functions