Filter
Top Products
6
HINT: The amp models are organized into three banks, each bank containing
eleven models (a total of thirty-three). Press the AMP switch to change banks.
Each time you press this, the AMP LED will switch to green, orange, or red,
and you’ll switch to amp banks STD, SPL, and CST. Each of the thirty-three
amp models has three preset programs (a total of ninety-nine programs). In
Preset mode, pressing the PRESET switch will cycle the PRESET LED among
green, orange, and red, switching among preset programs 1 (basic), 2 (effect),
and 3 (song).
Each song program reproduces the tone of a hit played by a famous guitarist.
See the chart on page 35 for a list of the songs presets included with your
amplifier.
Switching between the user programs
1. Press one of the top panel CHANNEL switches (CH1, CH2, CH3, or CH4).
The LED for the CHANNEL switch you pressed will light up, and the user
program specified for that channel will be recalled (Channel Select mode).
HINT: The user programs are organized into two banks, each bank con-
taining four channels (a total of eight programs). Press the CHANNEL
BANK switch to switch banks. Each time you press it, the BANK LED will
change between green and red, switching between channel banks 1 and 2.
HINT: You can store your own favorite sounds in a program. For details,
please refer to “Saving a program” (p. 15).