Filter
Top Products
109
Recording to USB memory
LS9-16/32 Owner’s Manual
10
USB memory recorder
6
Move the cursor to the REC button (●) at
the bottom of the screen, and press the
[ENTER] key.
You will use the transport at the bottom of the screen
to perform record/play/stop operations for the
recorder.
Each button has the following function.
1 REW ( ) button
● When you move the cursor to this button,
and press and immediately release the
[ENTER] key
You will return to the beginning of the song. If you
were already at the beginning, you will return to
the beginning of the preceding song in the title list
(→ p. 110).
● When you move the cursor to this button,
and press and hold the [ENTER] key for
two seconds or longer
The song will rewind.
In either of the above cases, operating this button dur-
ing playback will cause playback to resume from the
current location when you release the [ENTER] key.
B STOP (■) button
●
When you move the cursor to this button
and press the [ENTER] key during playback
Playback will stop.
●
When you move the cursor to this button
and press the [ENTER] key during recording
Recording will stop, and the recorded content will
be saved in a file (the file name and title will be
assigned a default name).
● When you move the cursor to this button
and press the [ENTER] key in record-ready
mode
Record-ready mode will be defeated.
C PLAY/PAUSE ( ) button
● When you move the cursor to this button
and press the [ENTER] key while stopped
Playback will start.
●
When you move the cursor to this button
and press the [ENTER] key during playback
Playback will pause.
● When you move the cursor to this button
and press the [ENTER] key in record-ready
mode
Recording will start.
●
When you move the cursor to this button
and press the [ENTER] key during recording
Recording will pause.
D FF ( ) button
● When you move the cursor to this button,
and press and immediately release the
[ENTER] key
You will move to the beginning of the next song in
the title list.
● When you move the cursor to this button,
and press and hold the [ENTER] key for
two seconds or longer
The song will be fast-forwarded.
In either of the above cases, operating this button dur-
ing playback will cause playback to resume from the
current location when you release the [ENTER] key.
E REC (●) button
● When you move the cursor to this button
and press the [ENTER] key while stopped
The recorder will be in record-ready mode, and the
PLAY/PAUSE ( ) button will blink.
While stopped, move the cursor to the REC (●) button
and press the [ENTER] key; the PLAY/PAUSE ( )
button will blink, and the recorder will be in record-
ready mode.
7
To begin recording, move the cursor to the
PLAY/PAUSE ( ) button in the lower part
of the screen, and press the [ENTER] key.
During recording, the REC (●) button and the PLAY/
PAUSE ( ) button will light. The TIME field will
indicate the elapsed time.
8
To stop recording, move the cursor to the
STOP (■) button and press the [ENTER]
key.
The audio file will be saved to USB memory.
9
To audition the recorded content, proceed
as follows.
1 Move the cursor to the PLAY/PAUSE ( )
button and press the [ENTER] key.
The recorded content will be played back via the input
channel you specified in step 3.
B To stop playback, move the cursor to the
STOP (■) button and press the [ENTER]
key.
1 2 3 4 5
•You can also assign the function of each button to a user-
defined key (
→
p. 196).
HINT
• In the default state, the recorded audio file will be saved in the
SONGS folder within the YPE folder. However, you may also
specify a folder of a level below the SONGS folder.
• The recorded file will be given a default title and file name.
You can change this later.
HINT