Filter
Top Products
198 Chapter 17—Remote Control
01V96 Version 2—Owner’s Manual
DAW PRE
Plays back from the pre-roll point up to the beginning of the selected area.
DAW IN
Plays back from the beginning of the selected area for a duration specified as
the pre-roll.
DAW OUT
Plays back to the end of the selected area for a duration specified as the
post-roll.
DAW POST
Plays back from the end of the selected area for a duration specified as the
post-roll.
DAW RTZ
Moves the playback cursor to the beginning of the session.
DAW END
Moves the playback cursor to the end of the session.
DAW ONLINE
Toggles between on-line and off-line.
DAW LOOP
Toggles Loop Playback on and off.
DAW QUICKPUNCH
Toggles QuickPunch on and off.
DAW AUTO FADER
Correspond to the Automation Overwrite (Auto Enable) functions.
DAW AUTO MUTE
DAW AUTO PAN
DAW AUTO SEND
DAW AUTO PLUGIN
DAW AUTO SENDMUTE
DAW AUTO READ
Select Automation modes.
DAW AUTO TOUCH
DAW AUTO LATCH
DAW AUTO WRITE
DAW AUTO TRIM
DAW AUTO OFF
DAW AUTO SUSPEND
Cancels Automation recording and playback for all channels. When Automa-
tion is interrupted, the LED flashes, and channel strip controls maintain the
current settings.
DAW AUTO STATUS
Displays the channel Automation mode (Read, Tch, Ltch, Wrt, or Off). The
mode setting appears at the bottom of each channel on a Channel or Meter
Display page when you press and hold the button to which this function is
assigned.
DAW GROUP STATUS
Displays a Group ID (to which each channel belongs) below each channel
number on a Channel or Meter Display page (in all caps for a main group and
in lowercase letters for a sub-group).
DAW MONI STATUS
Pressing the key (to which this function is assigned) enables you to view the
current monitoring mode and the channel strip type.
DAW CREATE GROUP
Pressing the key (to which this function is assigned) enables you to execute
the function specified in the menu of the Pro Tools Group list.
DAW SUSPEND GROUP
Suspends all mix groups temporarily. Press the button again to undo suspen-
sion.
DAW WIN TRANSPORT
Shows or hides the Transport window.
DAW WIN INSERT
Shows or hides the Insert window.
DAW WIN MIX/EDIT
Toggles between the Mix window and Edit window. (Both windows are not
displayed at the same time.)
DAW WIN MEM-LOC
Shows or hides the Memory Locations window.
DAW WIN STATUS
Shows or hides the Status window.
DAW UNDO
Executes the Edit menu’s Undo/Redo command.
DAW SAVE
Executes the Edit menu’s Save command.
DAW EDIT MODE
Pressing the button (to which this function is assigned) repeatedly selects
Shuffle, Slip, Spot, or Grid edit mode in this order.
DAW EDIT TOOL
Pressing the button (to which this function is assigned) repeatedly selects one
of seven edit tools (Zoomer, Trimmer, Selector, Grabber, Smart Tool, Scrubber,
and Pencil, in this order).
Parameter Function