Filter
Top Products
2. Press the [INPUT SEL] key for the input channel that you are recorded
from.
3. Press the [TRACK SEL] key of the track that you recorded on.
The line that connected the input channel to the track will now disappear and the
[TRACK SEL] key will no longer be blinking red, indicating that it is no longer record-
enabled.
Overdubbing Additional Tracks
1. Press and hold the [INPUT SEL] key for the input that you are going to
record from.
The Input Setting popup window will appear.
2. While playing the instrument, turn the GAIN knob up
to adjust the input level. The meter on the right side
of the Input Setting screen should be between the –6
to 0dB mark when the instrument is at its maximum
level.
3. In the Quick Navigate section press the [RECORD] key
until the DIRECT page of the RECORD screen is
displayed.
11