Filter
Top Products
Other functions
V1.7 Supplementary Manual
23
Added GPI functions
You can now select the attributes (latched or unlatched) of an external switch connected to a GPI IN
port.
■ GPI settings
1. In the Function Access Area, press the SETUP button to access the SETUP screen.
2. Press the MIDI/GPI button to access the MIDI/GPI screen.
3. Press the GPI tab.
Each time you press a switch attribute button, its indication will alternate between LATCH and
UNLATCH.
LATCH (a switch that alternately turns on/off each time it is pressed) is selected.
UNLATCH (a switch that is on only while pressed and is off when released) is selected.
Initializing the Dante audio network settings
It is now possible for Dante-related settings to also be initialized to their factory-set state when an error
occurs on the Dante audio network.
NOTICE
When you initialize, all console settings including the Dante audio network settings that had been
previously saved in memory will be lost.
Proceed with the following operation only if you are very sure you want to do this!
1. While holding down the SCENE MEMORY [STORE] key and [INC] key on the panel,
turn on the power to the CL console.
2. A message indicates that initialization is complete; press the CLOSE button.
Switch attribute button