Filter
Top Products
Input channels
V1.7 Supplementary Manual
6
If the channel’s HA settings are selected, the following HA settings will be copied from the channel
to the port that is patched. If you patch the input channel from an input that does not have these
settings (i.e., that does not have a HA), the default values will be specified.
NOTE
If you’re newly patching a previously-unpatched input channel, the default values will be specified
if the HA INFO field’s TAKE FROM CHANNEL button is pressed.
■ Settings in the PATCH/NAME popup window
1. In the OVERVIEW screen, press a channel number / channel name field to access
the GAIN/PATCH popup window.
2. Make settings in the same way as in the PORT SELECT popup window.
HA setting Default value
HA gain amount –6 dB
HPF on/off Off
Phantom power on/off Off
Gain compensation on/off Off