Filter
Top Products
19
CLP-880/860/840/820/820S
EFFECT
CHORUS
SYMPHONIC
TREMOLO
DELAY
EFFECT
CHORUS
SYMPHONIC
TREMOLO
DELAY
SONG
SELECT
–
/
NO
+
/
YES
Brilliance (CLP-880/860/840)
For a brighter or “sharper” tone, slide the control towards the
BRIGHT position. For a “rounder” more mellow tone, slide the control
towards the MELLOW position.
NOTE
• When the BRILLIANCE is set to BRIGHT, the overall sound will be
slightly louder. If the MASTER VOLUME is set at a high level the sound
may become distorted. If so, lower the MASTER VOLUME level.
This control can be used to change the tonality or “timbre” of the sound
output. The control range is from MELLOW to BRIGHT.
BRILLIANCE
BRIGHT
MELLOW
The Effect (CLP-880/860/840)
The [EFFECT] button allows you to select one of the effects that can give
your sound greater depth and animation.
To select an effect type press the [EFFECT] button a few times
until the indicator corresponding to the desired type lights (the indica-
tors light in sequence each time the [EFFECT] button is pressed). No
effect is produced when all indicators are off.
OFF
No effect is selected when no EFFECT indicator is lit.
CHORUS
Shimmering, broadening effect
SYMPHONIC
Adds a deep, symphonic backdrop
TREMOLO
Tremolo effect
DELAY
Echo effect
NOTE
• The default effect type (including OFF) and depth settings are different for
each voice.
Adjusting Effect Depth.............................................................................
Effect depth can be individually adjusted for the selected voice by
using the [–/NO] and [+/YES] buttons while holding the [EFFECT]
button. The depth range is from 0 through 20 (the current depth setting
appears on the LED display while the [EFFECT] button is held). A
setting of “0” produces no effect, while a setting of “20” produces
maximum effect depth. Press the [–/NO] and [+/YES] buttons simulta-
neously while holding the [EFFECT] button to recall the default
setting for the current voice (the default depth settings are different for
each voice).