Filter
Top Products
English
25
To change mLAN settings, select [Start | (All) Programs | Start Up], then start mLAN Manager.
- (When a message such as “file cannot be found” appears when uninstalling:)
Try executing the installation once more, then uninstall again.
■ (Windows) mLAN Manager (the mLAN icon in the task bar) has disappeared.
• Select [Start | (All) Programs | Start Up (or mLAN Tools)], then select mLAN Manager.
Specifications
■ General Specifications
■ Input/Output Specifications
Sampling Frequency Internal, External
Normal Rate Fs 44.1kHz(–10%) to 48kHz(+6%)
*1
Double Rate Fs 88.2kHz(–10%) to 96kHz(+6%)
Frequency
Response
Fs 44.1kHz, 48kHz 20Hz to 20kHz 0+1/–3dB, Input to Master Output L/R (Fs 48kHz, MIC/LINE)
Fs 88.2kHz, 96kHz 20Hz to 40kHz 0+1/–3dB, Input to Master Output L/R (Fs 96kHz, MIC/LINE)
Total Harmonic Distortion Less than 0.01%
1kHz, Line Input to Master Output L/R (Input Gain = Min,
Output Vol = Max)
Dynamic Range 110dB Line Input to Master Output L/R (1/2ch) or 3–8 ch
Noise level –100dBu (Output Vol: Min.), –90dBu (Output Vol: Max.)
Crosstalk 75dB 1kHz
AD converter
24bit Linear, 128times over sampling (Fs 44.1,48kHz) / 64time over sampling
(Fs 88.2,96kHz)
DA converter
24bit Linear, 128times over sampling (Fs 44.1,48kHz) / 64time over sampling
(Fs 88.2,96kHz)
Interface Functions
Compatible mLAN transfer rate S400 (400Mbps) / S200 (200Mbps)
mLAN Audio I/F
18ch Input / 18ch Output (Fs 44.1kHz, 48kHz)
Type: Input (Analog) 8ch, Digital Input 2ch, ADAT Input 8ch
14ch Input / 14ch Output (Fs 88.2kHz, 96kHz)
Type: Input (Analog) 8ch, Digital Input 2ch, ADAT Input 4ch
MIDI I/F 1 Input port / 1 Output port
Analog Input Connector
Input level
Nominal Max. before clip Input Impedance
INPUT 1,2
XLR/TRS Phone Combo
*2
,
Balanced, +48V ±3V Phantom,
Mic/Line/Hi-Z
–60dBu to –16dBu (Mic) –2dBu
3kΩ
–34dBu to +10dBu (Line) +24dBu
–56dBu to –12dBu (Hi-Z) +2dBu 500kΩ
INPUT 3-8
TRS Phone
*3
, Balanced, Line
–20dBu to +10dBu +24dBu 10kΩ
INSERT IN 1-2
TRS Phone
*4
, UnBalanced
–2dBu +12dBu 10kΩ
Analog Output Connector
Output level
Nominal Max. before clip
Actual Load Impedance
(Rated Load Impedance)
OUTPUT 1-8
(MASTER OUT L/R)
TRS Phone, Balanced
*3
+4dBu +18dBu 2kΩ (10kΩ)
INSERT OUT 1-2
TRS Phone
*4
, UnBalanced
–2dBu +12dBu 600Ω (10kΩ)
PHONES TRS Phone, UnBalanced — 100mW+100mW 33Ω (33Ω)