Filter
Top Products
35
Operating the Multi Part Editor
remotely from the 01X
The MOTIF ES can also be used as a controller for Multi Part Editor functions. For details on
operations of the MOTIF ES, refer to the MOTIF ES Owner’s Manual.
n Each channel on the 01X controls are corresponding to each part in the Multi Part Editor.
Basic Operation (common to both modes, Mixing and Edit)
Operation in the Mixing mode
01X operation (buttons) Explanation for remote control operation
[REMOTE] ➜ [MIDI] When running as a plug-in under SQ01, initiates remote operation of
the Multi Part Editor.
[SHIFT] + [REMOTE] When starting the Multi Part Editor from the Studio Manager,
initiates remote operation of the Multi Part Editor.
[NAME/VALUE] Switches the Name/Value mode displayed on the 01X.
BANK Switches the 1-8 channels to 1-8 parts.
BANK Switches the 1-8 channels to 9-16 parts.
[SELECTED CHANNEL] Switches the Mixing mode and Edit mode.
Rotating a channel knob Adjusts the selected parameter.
Pushing a channel knob Switches the selected parameter on/off when it is an “on/off” type
parameter.
[SHIFT] + rotating a channel knob Adjusts the selected parameter in large increments (ten times).
[SHIFT] + pushing a channel knob Returns the selected parameter to its default value.
Faders Controls the volume of the selected part and the master volume.
[ON] When [SOLO] button is lit, switches SOLO on/off for the selected
part. When [SOLO] button is not lit, switches the selected part on/off.
Selecting parameter controlled with a channel knob.
DISPLAY Selects a parameter one by one.
[PAGE SHIFT] + DISPLAY Selects the parameters to be edited section.
[PAN] Enables control over Pan.
[SEND] Enables control over Reverb Send level.
[GROUP] Enables control over the voice for the selected part.
[EFFECT] Enables on/off control over the Insertion Effect.
[SEL] (Master) Enables control over Master EQ.
EQ [LOW] Enables control over EQ Low for the selected part.
EQ [LOW-MID] or [HIGH-MID] Enables control over EQ Mid for the selected part.
EQ [HIGH] Enables control over EQ High for the selected part.