Yamaha PSR-1000 Electronic Keyboard User Manual


 
Basic Operations — Organizing Your Data
PSR-2000/1000
42
Moving Files/Folders
You can move files and folders as desired, for organizing your data. Any file/folder in the USER and FLOPPY DISK
sections can be moved, using the cut-and-paste operation described below.
END
1
Press the [2] (CUT) button.
The CUT display appears.
2
Select the desired file/folder for moving.
Select the appropriate le/folder and press the [7](OK) button.
The currently selected le/folder is highlighted. To select another le/folder, press one of the [A] -
[J] buttons.
Several les/folders can be selected together, even those from other pages. To release or cancel
the selection, press the button of the selected le/folder again.
Press the [6] (ALL) button to select all the les/folders in the displayed page (USER/FLOPPY
DISK). When the [6] (ALL) button is pressed the [6] button changes to ALL OFF button to
release or cancel the selection.
3
Press the [7] (OK) button.
To stop the operation, press the [8] (CANCEL) button.
This operation cannot be
used to directly move a le/
folder from one oppy disk to
another. If you want to do
this, cut and paste the le or
folder from the rst oppy
disk to the USER page, then
change disks and paste it to
the FLOPPY DISK page.
All les/folders in a oppy
disk can be copied to
another disk in one batch
(page 150).
4
Call up the destination display.
Only the USER and FLOPPY DISK pages can be selected as the destination.
Press the [4] (PASTE) button.
The le/folder you cut is now pasted at the destination.
After being pasted, the les
are automatically re-ordered
in alphabetical order and
displayed.
About les/folders in a
oppy disk
In the FLOPPY DISK page
of the Open/Save display,
only the les which can be
handled in that Open/Save
display will appear even
though a folder in a oppy
disk can contain different
kinds of les.
In the case of a folder cut-
and-paste operation (for
oppy disk), an entire folder
can be cut; however, only the
specic les which can be
handled in the current Open/
Save display will be pasted.