Panel Controls and Terminals
9
the category of songs, voices, styles, M.D.B. or Func-
tions. Pressing the buttons steps through the various
categories.
The SELECT [ ]/[ ] buttons are used to decrease
or increase the number of the desired song, voice,
style, M.D.B., or specific Function, as well as to
adjust certain settings.
@0
Numeric keypad, [+/YES] and [-/NO] but-
tons
These are used for selecting songs, voices, and styles.
(See pages 24.) They are also used for adjusting cer-
tain settings and answering certain display prompts.
@1
[ACMP] / [A-B REPEAT] button
When the Style mode is selected, this turns the auto
accompaniment on and off. (See page 36.) In the
Song mode, this calls up the A-B Repeat function.
(See page 54.)
@2
[SYNC STOP] button
This turns the Sync Stop function on and off. (See
page 40.)
@3
[SYNC START] / [PAUSE] button
This turns the Sync Start function on and off. (See
page 37.) In the Song mode, it is used to temporarily
pause song playback. (See page 53.)
@4
[INTRO ENDING] / [REW
rr
rr
] button
When the Style mode is selected, this is used to con-
trol the Intro and Ending functions. (See page 36.)
When the Song mode is selected, this is used as a
“rewind” control, or move the song playback point
back toward the beginning.
@5
[MAIN/AUTO FILL] / [FF
ff
ff
] button
When the Style mode is selected, these are used to
change auto accompaniment sections and control the
Auto Fill function. (See page 42.) When the Song
mode is selected, this is used as a “fast forward” con-
trol, or move the song playback point toward the end.
@6
[START/STOP] button
When the Style mode is selected, this alternately starts
and stops the style. (See page 36.) In the Song mode,
this alternately starts and stops song playback. (See
page 54.)
@7
[TEMPO/TAP] button
This button is used to call up the Tempo setting, let-
ting you set the Tempo with the dial, numeric keypad
or [+]/[-] buttons. (See page 20.) It also allows you to
tap out the tempo and automatically start a selected
song or style at that tapped speed. (See page 37.)
@8
ONE TOUCH SETTING buttons
These buttons ([MEMORY], [1], [2]) are used to
select the One Touch Setting registrations. (See page
28.)
@9
SONG MEMORY buttons
These buttons ([REC], [1] - [5], [A]) are used for song
recording, letting you record up to six different tracks
of a song (including a special Chord track). (See page
57.)
>
<
■ Rear Panel
#3
#0
#1 #2
#0 MIDI IN, OUT terminals
These are for connection to other MIDI instruments
and devices. (See page 67.)
#1 SUSTAIN jack
This is for connection to an optional FC4 or FC5
Footswitch for control over sustain, just like the
damper pedal on a piano. (See page 11.)
#2 PHONES/OUTPUT jack
This is for connection to a set of stereo headphones or
to an external amplifier/speaker system. (See page
11.)
#3 DC IN 12V jack
This is for connection to a PA-3C or PA-3B AC power
adaptor. (See page 10.)