Yamaha PSR540 Recording Equipment User Manual


 
8) Press the [+] button to set the Track to record.
NOTE: Repeat steps 6 and 8 to enable other Accompaniment Parts to be
recorded.
9) Press the [NEXT] button. The screen will display 'Rehearsal'.
10) Press the [NEXT] button.
11) Select one of the following options:
a) Recording with an Intro:
1] Press the [INTRO] button.
2] Play the keyboard.
3] Proceed to step 12.
b) Recording without an Intro:
1] Press either the [MAIN A] or [MAIN B] button.
2] Play the keyboard.
3] Proceed to step 12.
TIP: Press any of the 'Style Control' buttons, [INTRO], [MAIN A]
or [MAIN B] during the Song to add fills and pattern changes as
desired.
12) Press the [START/STOP] or [ENDING] button when finished.
TIP: Press the [ENDING] button twice to add a ritardando effect.
13) Select one of the following options:
a) Save the Recording:
1] Press the [+] button.
2] Press the [EXIT] button to finish.
b) Cancel the Save operation:
1] Press the [-] button.
2] Return to step 9 to re-record the Track(s) OR to finish
recording press the [EXIT] button.
II) Recording Track over Track:
TIP: The [BACK] button can usually be pressed at anytime to return to a previous step.
1) Press the red [RECORD] button. The screen will display 'RecMenu=Song'.
2) Press the [NEXT] button. The screen will display '001 New Song'.