Filter
Top Products
press the [RECORD] button.
TIP: Save the Song each time it reaches a new satisfactory level
or when multiple takes of the same part are being recorded.
b) Cancel the save operation.
1] Press the [-] button.
2] Return to step 10 to re-record the Track.
III) Recording Keyboard and Auto Accompaniment Parts Simultaneously:
Setting the Auto Accompaniment Split Point:
NOTE: The Auto Accompaniment Section of the keyboard can be disabled if only drum
parts are to be recorded as an accompaniment to a keyboard part.
1) Press and hold the [ACMP ON/OFF] button while pressing the [DIRECT
ACCESS] button.
2) Select one of the following options:
a) To disable the Auto Accompaniment section of the keyboard, press
and hold the [-] button until the screen displays 'Split = C-2'. The Right-
hand voice (R1) will be available across the entire keyboard.
b) To adjust the Auto Accompaniment split point, press the [+] or [-]
button to move the split point up or down the keyboard as desired.
3) Press the [EXIT] button.
Selecting an Auto Accompaniment Style:
1) Press the [STYLE] button.
2) Type in the number of the Auto Accompaniment Style on the numeric keypad.
3) Take note of the Tracks that contain Accompaniment data. This is necessary
information when selecting the Accompaniment Tracks in the Recording
Procedure.
NOTE: The Tracks that contain Accompaniment data are denoted by the 'Volume
Bars' above the Tracks [9] - [16] located in the lower right corner of the LCD
screen.
4) Press the [EXIT] button.
Recording Procedure:
TIP: The [BACK] button can usually be pressed at anytime to return to the previous step.
1
)
Press the
[
RECORD
]
button. The screen will dis
p
la
y
'RecMenu=Son
g
'.