Filter
Top Products
PSR-E313/YPT-310 Owner’s Manual 27
Quick Guide
Step
7
Record your own
performance
You can record up to five of your own performances as User Songs (User 1–5: Song numbers
103–107). Think of each User Song as a kind of basket or drawer for storing your recording.
Remember that you can also record a Style (containing chord changes) along with your own per-
formance.
1
Press the [REC] button.
After you’ve selected the desired User Song for recording, you
can select a Style to be recorded as well. To do this, press the
[STYLE] button and select the Style number while the ACMP
indication is on.
You can turn off the Record mode by pressing the [REC] button
again ( and stop flashing).
2
Start recording.
When you play the keyboard, recording will begin.
By playing keys to the left of the Split Point when the Auto
Accompaniment is set to on, the Style starts sounding and is
recorded with your performance.
When Auto Accompaniment is set to off, only your keyboard per-
formance is recorded.
Recording Your Performance
User 1
rEC
001
Flashes
The lowest-numbered unrecorded User Song
(Song numbers 103–107) available for record-
ing is displayed. If you want to select the Song
you will be recording, select the desired Song
number by using the [+] and [-] buttons.
•A total of approximately
10,000 notes or 5,500
chord changes can be
recorded to the five User
Songs.
NOTE
• Accompaniment cannot be
turned on or off once the
[REC] button is pressed.
NOTE
• If all User Songs (Song
numbers 103–107) con-
tain recorded data, Song
103 will automatically be
selected. In this case, you
will record over and erase
any previous data in Song
103, so be careful that
you won’t be erasing any
material you want to
keep!
CAUTION
Split Point
— Quick Guide —
Step 7 Record your own performance