Filter
Top Products
Using, Creating and Editing Voices
Editing the Volume and Tonal Balance (MIXING CONSOLE)
PSR-OR700 Owner’s Manual
90
14 Use the [3
ππ
ππ
††
††
]–[6
ππ
ππ
††
††
] buttons to select the destination for saving
the effect.
The maximum number for effects that can be saved differs depending on the
effect block.
15 Press the [I] (SAVE) button to save the effect (page 67).
When recalling the saved effect, use the same procedure as in step 8.
EQ (Equalizer)
Equalizer (also called “EQ”) is a sound processor that divides the frequency spec-
trum into multiple bands that can be boosted or cut as required to tailor the overall
frequency response. Usually an equalizer is used to correct the sound from speak-
ers to match the special character of the room. For example, you can cut some of
the low range frequencies when playing in large spaces where the sound is too
“boomy,” or boost the high frequencies in rooms and close spaces where the sound
is relatively “dead” and free of echoes. The instrument possesses a high-grade five-
band digital EQ. With this function, a final effect — tone control can be added to
the output of your instrument. You can select one of the five preset EQ settings in
the EQ display. You can even create your own custom EQ settings by adjusting the
frequency bands, and save the settings to one of two User Master EQ types.
■ Select a Preset EQ type
1–3 Same operation as in the “Basic Procedure” on page 84. In step 2,
select the EQ tab.
4 Use the [A]/[B] buttons to select a preset EQ type to suit your perfor-
mance (music style or environment).
15
14
0
Gain
5 bands →
Bandwidth
(also called “Shape” or “Q”)
Freq (Frequency)
EQ1 EQ2 EQ3 EQ4 EQ5
LOW LOW MID MID HIG MID HIGH