Filter
Top Products
31
YDP-121
• 6 x 35 mm round-head screws 1
R
L
3
C
2
• This vinyl tie will be used later in step N.
D
D
C
107
XUntie the vinyl tie.
Untie the vinyl tie and straighten out the bundled cord attached to the bottom of the pedal box. Don’t discard the vinyl tie,
you’ll need it later in step N.
CAttach the side panels (D) to the pedal box (C).
Place the pedal box on top of the wooden blocks attached to the side panels (D), and while eliminating any gaps between the
pedal box and side panels, attach using the four 6 x 35 millimeter round-head screws 1 — two screws on each side. Make
sure the pedals extend in the same direction as the side panel feet.