Filter
Top Products
26
YPP-200
The Function Mode
The [FUNCTION] button provides access to a range of functions that give the
YPP-200 extraordinary versatility. The functions are categorized in groups as
follows:
F1 Tuning ...................................................................... 27
F2 Scale ........................................................................ 27
F3 Dual Mode Functions ............................................. 28
F4 Soft Pedal Mode...................................................... 29
F5 Metronome Volume ................................................ 29
F6 Preset Song Part Cancel Volume .......................... 29
F7 MIDI Functions ........................................................ 30
F8 Backup Functions .................................................. 33
To Select a Function … ............................................................................
Z Press the [FUNCTION] button so that its indicator lights.
• Functions cannot be selected during demo/preset song playback or when
the user song recorder is in operation.
X Use the [TEMPO/FUNCTION t, s] buttons to select the desired
function: F1 through F8.
C In the case of the Scale (F2), Dual Mode (F3), MIDI (F7), and
Backup (F8) functions, you will have to press the [+/YES] button
once to enter the respective sub-mode after the function has been
selected, and then use the [TEMPO/FUNCTION t, s] buttons
again to select the desired sub-function.
• The Dual mode must be engaged before the F3 function can be selected.
If the Dual mode is not engaged, “
F3.-
” will appear on the display and the
sub-mode will not be available.
V Set the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
• After selecting the function, the current setting will be displayed when the
[–/NO] or [+/YES] button is pressed for the first time.
B Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
● Operation Example
(sub-mode)
Press [+/YES]
Use [TEMPO/
FUNCTION t, s]
Use [–/NO], [+/YES]
Press [–/NO] or [+/YES]
once