Yorkville Sound M1610 DJ Equipment User Manual


 
18
M810 SPECIFICATION
S
Number of Channels
10
Mono Channel EQ
Low, Mid, High
Stereo Channel EQ
Low, Mid, High
Channel Effects
All Channels
Monitors Effects
Yes
Balance Controls
Ch. 7 - 10
Pan Controls
Ch. 1 - 6
Channel Overload Protection
Ch. 1 - 6
Inputs - XLR (bal)
8
Inputs - 1/4"
10
Inputs - RCA (unbal)
1 Pair
Mute Switches
Global 1 - 8
Activity / Solo LED
Trim Set Ch. 1 - 6
Clip /Mute LED
All Channels
Phantom Power
48V + LED Indicator
Internal Effects
Digital 16 Bit; 255 Effects
Auxiliary Sends
Effect - Monitor
Effects Send
Yes
Effects Return
Internal
Effects Return to Main
Yes
Effects Return to Monitor
Yes
Reverb / Effects Footswitch
Yes
Record Outputs
Stereo RCA Pair
Max Gain to Line Out -Mic Input (dB)
84
Max Gain to Line Out -Line Input (dB)
82
Master EQ -1 (type /Channels /Range - dB)
Graphic 9 band (160hz-6.3khz) +2 band Shelving
Monitor EQ -1 (type /Channels /Range - dB)
Graphic 9 band (160hz-6.3khz) +2 band Shelving
Main Outputs ( Line Level)
2 x 1/4-inch TRS
Main Amp Inputs (Line Level)
2 x 1/4-inch TRS
Monitor Outputs (Line Level)
1 x 1/4-inch TRS
Outputs - Amp A - 1/4" Jacks
2
Outputs - Amp A - Speakon 4-pin
1
Outputs - Amp B - 1/4" Jacks
2
Outputs - Amp B - Speakon 4-pin
1
Mixer - Signal to Noise Ratio (dB)
105
Mixer - Frequency Response (Tone and EQ Flat,+/-2dB)
20 - 20,000
Mixer - Input Referred Noise to line out, @ 150 Ohms (dBv)
-119
Mixer THD (Main out w/ -10dB input)
0.01%
Amp A - Power Output @ 8 Ohms (0%1"THD, 1kHz)
250
Amp A - Power Output @ 4 Ohms
400
Amp A - Power Output -other
400 @ 2 ohms
Amp B - Power Output @ 8 Ohms (0%1"THD, 1kHz)
250
Amp B - Power Output @ 4 Ohms
400
Amp B - Power Output -other
400 @ 2 ohms
THD - 1kHz (dB)
0.1%
THD - 20Hz-20kHz (dB)
0.5%
Hum and Noise (un / Aweight -dB)
-101 / -107
Typical crosstalk -1 kHz (dB)
better than -60 db
Input Impedance - Bal/Unbal (Ohms)
20k / 10k ohms
Input Sesitivity (Vrms Sine)
1.4
CMRR @ 60Hz (min/typ)
-37db / -60db
Max Votage Gain (dB)
29
Power Consumption
4.2A @ 60Hz / 2.2A @ 50Hz
Protection
Thermal, Short Circuit, Impedance Overload
Cooling
2 x 80 mm Fans
Transformer Type
Toroidial
Finish
Grey and Black Powder Coat
Chassis Construction
Steel and Aluminum
Rackmount
Yes (Kit Available)
Other Features
Tiltback or Upright Wedge Angles
Dimensions (DWH, inches)
11.1 x 18.6 x 11
Dimensions (DWH, cm)
28 x 47 x 28
Weight (lbs/kg)
27 / 12